The Healing Touch

May 24, 2008 by Rob.

It took longer that I’d hoped to stop chasing the wrong problems before I finally found the real cause. After about 3 hours of hunting, I found two problems: one was a design issue and the other was a blown fuse caused by the design issue.

The design issue was the way I’d wired the charger “still plugged in” relay to the key safety interlock (KSI) on the controller. I need both charger relays (see older posts for detail) to turn on the vent fans. I’d been using the same relay to turn on the controller KSI relay. Unfortunately, that sent 12 volts to the relay even when the car was parked. This was effectively BY PASSING my contactor so that traction voltage (144 v) was still present for the controller, volt meter, and the DC-DC converter. That was not supposed to happen so I disabled it and hooked the KSI to the key on. Now the motor could go even if I’m plugged in (oops), but I always coast down my driveway to start so it was not really much of a safety benefit.

The second issue was a blown fuse (it should be clear not white) in the DC-DC converter. At least, that was easy to find and fix

Now the RAVolt and I are happy again.

Posted in Safety, Parts, Improvements, Pictures, Storyline | No Comments »